SMart One Embedded Electronics Projects free 8051,PIC,Arduino, Mumbai,Pune.

Smart No	Project Name	Description	Cost (Rs.)
SM_002	DENSITY BASED TRAFFIC SIGNAL SYSTEM	The project is designed to develop a density based dynamic traffic signal system where the signal timing changes automatically on sensing the traffic density at the junction.	5000
SM_003	RFID BASED PAID CAR PARKING	RFID based car parking uses a microcontroller along with sensing circuits monitoring entry and exit of cars. The car owners are allowed an entry only when their RFID card is swiped .The amount in the card automatically gets reduced with a display indicating available number of parking.	5500
SM_004	IR OBSTACLE DETECTION TO ACTUATE LOAD	The project actuates a load when IR rays are interrupted by any object. The IR transmitter continuously transmits rays over the receiver and when these rays are blocked by any object an interrupt is sent the microcontroller.	5000
SM_005	DENSITY BASED TRAFFIC SIGNAL WITH REMOTE OVERRIDE IN EMERGENCY	Project uses 8051 MC interfaced with the IR sensors and photodiodes aligned in line of sight configuration for detecting traffic density measured in three ways low, medium and high and overrides signal timing using a RF remote control.	5500
SM_006	AUTO INTENSITY CONTROL OF STREET LIGHTS	The project overcomes the street light (HID lamps) limitations by using LED's as light source and adjusting its intensity according to requirements.	5500
SM_007	LIFE CYCLE TESTING OF ELECTRICAL LOADS BY DOWN COUNTER	The system uses microcontroller with a keypad interfaced to enter a required number  for testing the life cycle of load where the system counts down one in each second till the set number reaches zero. A relay switches the load ON & OFF for every count.	5000
SM_008	STREET LIGHT THAT GLOWS ON DETECTING VEHICLE MOVEMENT	The project is designed to detect vehicle movement on highways to switch ON only a block of street lights ahead of it (vehicle), and to switch OFF the trailing lights to save energy.	5000
SM_009	OBJECT COUNTER WITH 7 SEGMENT DISPLAY	The project is designed to maintain a count of products moving on a conveyor belt in industries on 7 segment display achieved using IR interruption concept.	4500
SM_011	DISPLAY OF DIALED TELEPHONE NUMBERS ON SEVEN SEGMENT DISPLAY	The project displays the dialed telephone number on seven segment display for better visibility using a DTMF decoder interfaced to microcontroller.	4000
SM_012	SUN TRACKING SOLAR PANEL	A solar panel coupled to a stepper motor to track the Sun so that maximum sun light is incident upon the panel at any given time of the day with the help of a programmed microcontroller to deliver stepped pulses in periodical time intervals for the stepper motor to rotate the mounted panel as desired.	5000
SM_013	CELL PHONE BASED DTMF CONTROLLED GARAGE DOOR OPENING SYSTEM	The project aims at automatic garage door opening through a mobile phone by entering the password. The system is connected to the garage door and is interfaced to mobile phone.	5000
SM_014	PROGRAMMABLE AC POWER CONTROL	The project controls the AC power based on the principle of firing angle control of thyristors. It uses microcontroller which is fed with the input using a keypad and ZVS is given as reference. A 16X2 LCD is used for display purpose.	6000
SM_015	PROGRAMMABLE LOAD SHEDDING TIME MANAGEMENT FOR UTILITY DEPARTMENT	The project operates an electrical load multiple number of times as per the program to overcome the manual switching of load. It has an inbuilt real time clock (RTC) to keep tracking the time and thus to switch ON/OFF the load accordingly.	6500
SM_016	SPEED CHECKER TO DETECT RASH DRIVING ON HIGHWAYS	The project will check on rash driving by calculating the speed of a vehicle using the time taken to travel between the two set points at a fixed distance and speed limit is set by the police who uses the system depending upon the traffic at the very location.	5000
SM_017	AUTO POWER SUPPLY CONTROL FROM 4 DIFFERENT SOURCES SOLAR, MAINS, GENERATOR & INVERTER TO ENSURE NO BREAK POWER	The project ensures continuous power supply using four sources: solar, mains, generator, and inverter when any one of them is unavailable it switches to others.	5000
SM_018	DTMF BASED LOAD CONTROL SYSTEM	The project works on the principle of DTMF tone command so received from any phone to remotely switch any electrical load by using a DTMF decoder interfaced to a microcontroller.	5000
SM_020	PRECISE ILLUMINATION CONTROL OF LAMP	The project is designed to maintain precise illumination of a lamp. A microcontroller is used along with thyristor controlled lamp for maintaining the illumination.	6000
SM_021	SECURITY SYSTEM WITH USER CHANGEABLE PASSWORD	The project is a security system having the provision to change the password by the authority only. The password is stored in an EEPROM, interfaced to the microcontroller with a keypad used to enter the password and a relay to lock or unlock the electric door.	6500
SM_023	CELL PHONE CONTROLLED ROBOTIC VEHICLE	The project drives a vehicle using mobile phone. It requires two mobile phones, one to send DTMF control commands and receiver phone mounted on the robot.	5500
SM_024	PROGRAMABLE ENERGY METER FOR ELECTRICAL LOAD SURVEY	The project evaluates consumption of any load in units and cost in rupees as per the energy tariff and the number of hours the load is going to be used.	6500
SM_027	AUTOMATIC IRRIGATION SYSTEM ON SENSING SOIL MOISTURE CONTENT	The project is intended to provide proper amount of irrigation to agricultural fields by observing the moisture content of soil using moisture sensors and accordingly operates water pump by automatically switching it ON/OFF. The moisture content is continuously displayed on a LCD screen.	6500
SM_029	PROGRAMMABLE SWITCHING CONTROL FOR INDUSTRIAL AUTOMATION IN REPETITIVE NATURE OF WORK	The project switches industrial loads using a user programmable logic control device for sequential operation for repetitive nature of work by using microcontroller in such a way that the loads can be operated in three modes: Set mode, Auto mode and Manual mode.	6000
SM_030	INDUSTRIAL TEMPERATURE CONTROLLER	It controls and displays the temperature of any device that is used for industrial application as per requirements through a microcontroller and an IC DS1621 for sensing the temperature.	6000
SM_031	SPEED CONTROL UNIT DESIGNED FOR A DC MOTOR	The project controls the speed of a DC motor by varying voltage across the terminal. The speed of DC motor is directly proportional to the voltage applied therefore the duty cycle of the pulse is varied ( Pulse Width Modulation) to control its speed.	5000
SM_032	MOVEMENT SENSED AUTOMATIC DOOR OPENING SYSTEM	The project is an automatic door opening system that senses any body movements using PIR sensors and automatically opens and closes the door.	5500
SM_033	CONTACTLESS LIQUID LEVEL CONTROLLER	Project allows to detect the level of liquid by using ultrasonic module that measures liquid level (in cm) by detecting the reflection and starts pump if level faals below a set point.	6000
SM_034	DISTANCE MEASUREMENT BY ULTRASONIC SENSOR	The project measures the distance of any object by using an ultrasonic module comprising of a transmitter and receiver  interfaced to a microcontroller.	4500
SM_035	DUAL CONVERTER USING THYRISTORS	A power electronics control system to get either polarity DC from AC rectification by forward converter and reverse converter by using a pair of thyristor controlled bridge (4 SCRs X 2 ) that enables the DC motor to get reversed polarity for either direction rotation.	7000
SM_036	PASSWORD BASED CIRCUIT BREAKER	This system requires a password to operate the circuit breaker (ON/OFF) which is fully controlled by a microcontroller interfaced to a matrix keypad for entering the password.	6500
SM_037	PRECISE DIGITAL TEMPERATURE CONTROL	It is a digital temperature sensor for precise control of temperature in medical applications or industries that provides the temperature information on a display and, when the temperature exceeds the set point, then the load switches OFF.	6000
SM_038	OBSTACLE AVOIDANCE ROBOTIC VEHICLE	An obstacle avoidance robotic vehicle that uses ultrasonic sensors for its movement. The ultrasonic sensor is used to detect any obstacle ahead of it and sends a command to the microcontroller.	5500
SM_040	DENSITY BASED AUTO TRAFFIC SIGNAL CONTROL WITH ANDROID BASED REMOTE OVERRIDE	Project uses 8051 MC interfaced with the IR sensors and photodiodes aligned in line of sight configuration for detecting traffic density measured in three ways low, medium and high and overrides signal timing using android device.	6000
SM_043	RFID BASED ATTENDANCE SYSTEM	The system records the attendance of students using RFID tags. Each student is provided with his/her authorized tag to that has to be swiped in RFID card reader which reads the data and verifies it with the data stored in the microcontroller.	5500
SM_044	RFID BASED PASSPORT DETAILS	The project accesses the passport details of a passport holder through RFID technology. The data in RFID tag is compared with the one stored in microcontroller through RFID card reader and thus it verifies the person.	5500
SM_045	REMOTELY CONTROLLED ANDROID BASED ELECTRONIC NOTICE BOARD	A wireless notice board that displays notices when a message is sent from the user’s android application device. It is received and retrieved by the Bluetooth device interfaced to microcotroller at the display unit.	6500
SM_046	SOLAR POWERERD LED STREET LIGHT WITH AUTO INTENSITY CONTROL	It is a system for LED based street lights with auto intensity control using solar power from photovoltaic cells.	5500
SM_047	HOME AUTOMATION BY ANDROID APPLICATION BASED REMOTE CONTROL	Home automation system is developed to automate the use of conventional lighting mechanism (wall switches) in house by using android application controlled remote that sends ON/OFF signals to microcontroller.	6000
SM_049	RFID BASED SECURITY ACCESS CONTROL SYSTEM	It provides security in an organization by allowing only the authorized person with a valid RFID tag to enter into secured premises by displaying a message “AUTHORIZED” / “UNAUTHORIZED”. The tag contains an integrated circuit used for storing and processing information.	5500
SM_050	ANDROID APPLICATION CONTROLLED REMOTE ROBOT OPERATION	It controls a robotic vehicle from an android application by using  bluetooth technology interfaced to the control unit on the robot for sensing the signals transmitted by the android application and microcontroller operates the robot movements.	6000
SM_051	REMOTE AC POWER CONTROL BY ANDROID APPLICATION WITH LCD DISPLAY	It controls AC power to a load by using firing angle control of thyristor controlled remotely by android application device. The project uses zero crossing point of the waveform which is detected by a comparator whose output is then fed to the microcontroller.	6500
SM_052	OBJECT DETECTION BY ULTRASONIC MEANS	It detects any object ahead of the ultrasonic transducer by using an emitter for sending 40 kHz sound wave; and a detector that detects this 40 kHz sound wave and sends the signal back to the microcontroller.	5000
SM_053	REMOTE PASSWORD OPERATED SECURITY CONTROL BY ANDROID APPLICATIONS	The project provides a security system for organizations and home having the provision to change the password by the authority only where one can lock and unlock a door or locker from remote android device by using microcontroller. And the system even alerts when there is any wrong attempt in unlocking the door.	6500
SM_054	PASSWORD BASED REMOTE CONTROLLED DOOR OPENING BY ANDROID APPLICATION	The project aims at automatic garage door opening through an android application device by entering the password. The system is connected to the garage door and is interfaced to android device.	5500
SM_055	RAILWAY LEVEL CROSSING GATE OPERATION REMOTELY BY ANDROID	It controls the railway level crossing gate through Android Application by the station master for opening and closing railway crossing gate. When the station master sends commands from Android device  to the Bluetooth interfaced to microcontroller which sends an output signal to switch on the motor to close or open the gate.	5500
SM_056	REMOTE SPEED CONTROL OF DC MOTOR BY   ANDROID APPLICATIONS	The project controls the speed of a DC motor by varying voltage across the terminal by android device. The speed of DC motor is directly proportional to the voltage applied therefore the duty cycle of the pulse is varied ( Pulse Width Modulation) to control its speed and it is acheived by microcontroller interfaced to bluetooth.	5500
SM_057	RF BASED HOME AUTOMATION SYSTEM	Home automation system is developed to automate the use of conventional lighting mechanism (wall switches) in house by using RF controlled remote that sends ON/OFF signals to microcontroller.	5500
SM_058	ANDROID BASED REMOTE PROGRAMMABLE SEQUENTIAL LOAD OPERATION	It is designed to switch industrial loads using a user programmable logic control device and Android application for sequential operation generally used for repetitive nature of work in industrial operations. Three sets of modes are used by microcontroller to manage load settings.	6000
SM_059	METAL DETECTOR ROBOTIC VEHICLE	A robotic vehicle that can sense metals ahead of it on its path similar to sensing land mines controlled by a remote using RF technology. It consists of a metal detector circuit interfaced to microcontroller that alarms the user behind it about a suspected land mine ahead.	6500
SM_060	FLASH FLOOD INTIMATION OVER GSM NETWORK WITH USER PROGRAMMABLE NUMBER FEATURES TO THE STATION MASTER	The project detects rising water level in a river at a reasonable distance from the rail track/ roadways and intimate that to the respective authorities through SMS.It uses a water sensing arrangement which is interfaced to a programmable microcontroller.	8000
SM_062	WIRELESS ELECTRONIC NOTICE BOARD BY GSM WITH USER PROGRAMABLE NUMBER FEATURES	It a wireless notice board that displays notices when a message is sent from the users mobile via GSM modem at the display unit. The desired number is auto saved on the microcontroller over a missed  call.	8500
SM_063	METAL DETECTOR ROBOTIC VEHICLE OPERATED BY ANDROID APPLICATION	A robotic vehicle that can sense metals ahead of it on its path similar to sensing land mines controlled by a remote android application. It consists of a metal detector circuit interfaced to the control unit that alarms the user behind it about a suspected land mine ahead.	6500
SM_064	THEFT INTIMATION OF THE VEHICLE OVER SMS TO OWNER WHO CAN STOP THE ENGINE REMOTELY	It uses wireless technology to intimate the owner of the vehicle about any unauthorized entry, if someone tries to steal the car, the 8051 series microcontroller gets an interrupt and commands the GSM modem to send an SMS to the owner who in turn can send back an SMS to the GSM modem to ‘stop the engine’.	8000
SM_065	RAILWAY LEVEL CROSSING GATE CONTROL THROUGH SMS WITH USER PROGRAMMABLE NUMBER FEATURES BY THE STATION MASTER OR THE DRIVER	The project controls the railway level crossing gate through SMS sent by the station master or driver by using a GSM modem is interfaced with the microcontroller that sends an output signal which activates a mechanism to switch on the motor to close/open the gate.	7500
SM_066	INTEGRATED ENERGY MANAGEMENT SYSTEM BASED ON GSM PROTOCOL WITH USER PROGRAMMABLE NUMBER FEATURES AND ACKNOWLEDGEMENT FEATURE	It allows the owner of the house to control the appliances by just sending an SMS to the device and then also receiving the status of the same via return SMS. The SMS is sent to GSM modem interfaced to microcontroller that initiates a mechanism to activate a relay for controlling the corresponding home appliance.	8500
SM_067	GSM BASED ENERGY METER READING WITH LOAD CONTROL	A GSM based energy meter reading system and load control through SMS by using 8051 series microcontroller that takes the reading from the energy meter and send it to the control room by an SMS via SIM loaded GSM modem.	8500
SM_068	GSM BASED MONTHLY ELECTRICITY ENERGY METER BILLING AND SMS UPON GSM WITH USER PROGRAMMABLE NUMBER FEATURES TOGETHER WITH ONSITE DISPLAY TO THE USER	The project is designed for reading electrical energy consumed in units and in rupees to display on an LCD screen to the user. The data is sent through GSM modem to the electricity department via SMS where a microcontroller interfaced to the energy meter gets the Watt Hour pulses processes these pulses to calculate the units consumed and cost involved and even send the data to the electricity department via SMS.	8500
SM_070	SOLAR POWERED AUTO IRRIGATION SYSTEM	The project uses solar energy to operate the irrigation pump by sensing the moisture content of soil and microcontroller switches on/off the pump accordingly.	6500
SM_074	PICK N PLACE ROBOTIC ARM AND MOVEMENT CONTROLLED BY ANDROID WIRELESSLY	A pick n place robotic vehicle with a soft catching gripper controlled remotely from an android application that sends commands to microcontroller to control the movement of the robot either to move forward, backward and left or right etc. and even control the grip movement.	8500
SM_075	PICK N PLACE WITH SOFT CATCHING GRIPPER	A pick n place robotic vehicle with a soft catching gripper to avoid extra pressure on the suspected object for safety reasons controlled by RF for remote operation.	8500
SM_076	WAR FIELD SPYING ROBOT WITH NIGHT VISION WIRELESS CAMERA	A robotic vehicle using RF technology for remote operation attached with wireless camera for monitoring purpose. The robot along with camera can wirelessly transmit real time video with night vision capabilities. This is kind of robot can be helpful for spying.	11000
SM_077	WAR FIELD SPYING ROBOT WITH NIGHT VISION WIRELESS CAMERA BY ANDROID APPLICATIONS	A robotic vehicle using android application for remote operation attached with wireless camera for monitoring purpose . The robot along with camera can wirelessly transmit real time video with night vision capabilities. This is kind of robot can be helpful for spying.	11000
SM_079	VOICE CONTROLLED ROBOTIC VEHICLE WITH SPEECH RECOGNITION	The project is designed to control a robotic vehicle by voice commands that are sent by RF to control the movement of the robot either to move forward, backward and left or right etc. for remote operation. An 8051 series of microcontroller is used together with a speech recognition module for the desired operation.	6000
SM_080	LPG/CNG gas leakage detection system for cars, small scale factories. On detection auto switch off.	CNG and LPG gases are widely used fuel sources for automobiles as well as industrial and domestic usage. But these fuel sources are highly inflammable and may lead to huge accidents if not handled with care. Here we propose system to detect LPG as well as CNG detection and even prevent any accident from happening. The system is designed to detect gas leakage and instantly turn off the gas supply as soon as it is detected. The system uses a gas sensor for detection purpose. This system consists of an LCD screen for displaying gas leakage.	6000
SM_081	Prepaid energy meter, Automatic wireless updating of energy use and billing at the sub station, meter man not required.	Most of the energy meters are designed to bill as per the units of energy consumed. These meters need to be manually read by people in order to provide monthly/quarterly bills. We here propose a prepaid energy billing meter. The system is designed to allow amount of energy to be used as long as the account has balance pending. It also allows the operator to recharge the user account using GSM. The system first accepts account recharge and allows to use only limited units of energy as per recharge and then cuts off the supply.	10000
SM_083	Automatic race time and rank measurement for four lane race.	Professional athletes, car drivers, bicycle riders need to keep practising by measuring their lap timings. While practising alone it is not possible for them to start and stop the stopwatch each time. At such time they need to focus on their performance instead of keeping track of the watch. So here we propose a system that can be work by user as a wrist watch. The system consists of a push button that needs to be pushed by user to start the system.	5000
SM_084	Advanced access controlled system lock system. On wrong password/Door breaking sends SMS/CALL to owner & police.	We usually cone across areas where a user needs to control his domestic or company door lock from wide distances. Here we propose a system that allow user to unlock a door by entering a password remotely. We propose to use GSM technology ie through SMS. Our system allows user to send an sms with password in order to unlock a door. The door opens on receiving the right password.	8500
SM_085	Gas Monitoring system for chemical factories to protect Bhopal like gas tragedies. Send SMS/CALL to registered users.	Gas leakage tragedies and accidents have lead to heavy losses over the years. So it is very important to detect any gas leakage and prevent any accidents. So we here propose a system to detect LPG/CNG gas leakage scenarios and provide a security alert to intended users. We here propose to build the system using a MQ6 gas detection sensor and interface it with 8051 family microcontroller along with gsm modem for alerting via an SMS.	8500
SM_086	Petrochemical fire monitoring and alert system using GSM modem to avoid fire in a large petroleum refinery.	Dangerous gas leakage as well as fires have caused wide damage to industries and economies in the past. These agents spread wildly and instant action needs to be taken as soon as such an event occurs. It is very important to detect a gas leak or fire as soon as it breaks out so that it can be prevented from spreading instantly. We here propose a system that detects gas leakage as well as fires as soon as they start and alerts the authorities automatically so that it can be stopped from spreading.	8500
SM_087	Designing of Alcohol Sensing instrument using Atmega	He here propose an alcohol sensing system that measures alcohol intake, displays percentage of alcohol and also sounds an alarm if it is above a particular threshold. Here we use an alcohol sensor circuit along with lcd display and a buzzer alarm. Our system first uses the alcohol sensor in order to detect alcohol. The sensor provides analog output. This analog output is now provided to the microcontroller for further processing.	5500
SM_088	Automatic DAM Shutter control using Servo motor. Controls DAM shutter based on the water level.	We here propose an automatic dam water level monitor and controller system. Our proposed project uses sensors to sense the water level and then opens the dam gate (motor used to demonstrate as dam gate) according to the water level. Our system uses multiple water level sensors (float sensors) for this purposes. The sensors are mounted at three different levels in order to check water level and provide signals accordingly.	5500
SM_089	Remote control stepper motor, Control your stepper motor based devices by controlling direction and speed	Stepper motors are quite different from DC motors since they have the ability to break down a full rotation to small steps. It allows user to control the rotation angle of motor with precision. Dc motors rotate when we apply terminal voltage. Stepper motors are built with electromagnets with each having a different alignment. When a particular electromagnet is powered the gear teeth are aligned as per that particular electromagnet.	5500
SM_090	Door Lock security system using RF Technology. Open/Close door with unique secured password for multiple users.	Mechanical locks as well as electrical locks are exposed and can be broken by robbers. We here need a lock that is not exposed on outside but can lock a door from the inside. Now this lock can be still be opened by authorized user and not anyone else. Now this allows for a remotely operated secure door opening system that can be used for domestic as well as commercial usage.	6000
SM_091	Modified & Advanced blind stick (On obstacle Alarm1, Water bodies Alarm2, Control to search stick if misplaced)	Blind stick is a simple stick used by visually disabled people for navigation. We here propose an advanced blind stick that allows visually challenged people to navigate with ease using advanced technology. The blind stick is integrated with ultrasonic sensor along with microcontroller. Our proposed project first uses ultrasonic sensors to detect obstacles ahead using ultrasonic waves. On sensing obstacles the sensor passes this data to the microcontroller. The microcontroller then processes this data and calculates if the obstacle is close enough.	5000
SM_093	Time controlled RTC technology based water pump controller (water supply)	We usually come across areas where we need to switch devices on/off at particular time intervals. We simulate this system using a water pump that is controlled through RTC input. The RTC (Real time clock) is used to switch the motor on and off at desired time intervals. An RTC outputs real time signals which need to be converted into digital signals for further processing.	6500
SM_095	Automatic viper using servo motor	Today’s car wipers are manual systems that work on the principle of manual switching. So here we propose an automatic wiper system that automatically switches ON on detecting rain and stops when rain stops. Our project brings forward this system to automate the wiper system having no need for manual intervention. For this purpose we use rain sensor along with microcontroller and driver IC to drive the wiper motor. Our system uses rain sensor to detect rain, this signal is then processed by microcontroller to take the desired action.	5500
SM_097	SMS based weather report information system (temperature and humidity and light monitoring)	Here we propose a Gsm based weather sensing and reporting project. The system senses temperature, as well as light and humidity and conveys this to the user wirelessly. Our system uses temperature sensor to detect and record current temperature. It uses a light sensor in order to detect current lighting conditions. Also a humidity sensor is used to detect current humidity conditions.	9000
SM_098	GSM based industrial protection system using temperature, smoke sensors and light dependent resistor	With heavy automation taking place these days, the number of industries as well as number of accidents in those industries have increased substantially. Human errors and manual safety systems lead to increase in industrial accidents. So here we propose a gsm based industrial protection system that detects smoke, temperature as well as light to keep track of accidents.	9000
SM_100	Intelligent rail gate control and display reducing time and alarm system	The idea is to design such a system through which the railway crossing closes itself when a train seems to be coming. There is a timer, which will be displaying the time after which the gate is going to be closed. This will help the people crossing the gate.	5000
SM_101	GSM based supervisory control of water Pump and send information of dry run.	The main objective of this project is to develop a project to control the appliance through SMS. Using any mobile a message is sent to another SIM loaded GSM modem on board that receives the SMS and feeds the data to microcontroller to output logical data to relay driver IC that finally controls pump or any load through its "NO" contacts and. All conditions are seen on a 16X2 display.	8500
******	*****************************	We Also Implement Your Idea Project  Idea …….. Email Us Your Project Idea At	**********
		( smartoneembedded@gmail.com )
		Download Project List Here....